Güvenilir casino siteleri Gaziantep escort primal grow pro erotik film izle diyarbakır escort

Paint Protection Film

Can The Film Be Waxed?

While you can wax the film, be sure the product you are using doesn’t contain Naphtha or Kerosene in concentrations over 5%, and avoid waxes that contain dyes. For best results, we recommend using our XPEL Flawless Finish Paint Protection Film Sealant or XPEL Ceramic Boost. This product has been specially formulated for use with polyurethane paint protection films to provide the maximum protection and gloss, while containing no ingredients that would cause discoloration over time.

Can XPEL Be Installed On Signs?

Yes. Paint protection film can be applied to most smooth painted surface.

What Is The Expected Life Of XPEL?

Our ULTIMATE PLUS PLUS Series Films are warrantied for 10 years. This warranty covers: yellowing, staining, delaminating, cracking, peeling, bubbling, and more. More information on the warranty can be found on our Warranty Information page

Can I Use Detailing Clay On The Film?

Yes. The process is the same as with regular paint: wet the surface with a lubricant such as XPEL Detail Spray or soapy water and then gently rub the surface with the clay bar. For stubborn insect, bird dropping, or hard water stains, use an all-purpose degreaser such as Simple Green as the lubricant for the detailing clay.

How Do I Maintain XPEL ULTIMATE PLUS?

No special maintenance is required for XPEL ULTIMATE PLUS. However, the film will last longer and will be easier to clean if treated twice a year with XPEL Flawless Finish Paint Protection Film Sealant.

Can XPEL Film Be Applied To Chrome?

Any of our films can be installed on Chrome, though the finish will look slightly different than if left unprotected. We recommend having your installer apply a small swatch to the desired surface so you can see what it looks like before deciding.

Will XPEL ULTIMATE PLUS Yellow Over Time?

XPEL ULTIMATE PLUS is warrantied for 10 years against a range of issues including yellowing. More information about the warranty can be found on our Warranty Information page

Do You Have A Colored Paint Protection?

We are always working on cutting edge film and technology, please contact customer service for inquiries at 800-447-9928 for current availability.

How Deep Of A Scratch Can Film Still Heal?

The clear coat is the self-healing layer and is approximately 13 microns thick. If that layer is penetrated, the film will not heal.

Do You Have A First Time Buyer Discount?

Not at this time, please contact customer support for more information

Can I Purchase Precut Film For My Vehicle?

Yes, our pre-cut kits are available for sale on our website, www.xpel.com, or by calling our customer support team at 1-210-678-3700. However, as installation can be quite difficult without previous experience or formal training, we recommend having installation performed by one of our Factory Trained Installers. To find an installer nearest you please visit our Installer Locator to find an installer near you.

Can XPEL Be Installed On Your Windshield?

No, XPEL Paint protection film cannot be installed on your windshield. Due to the impact absorbency of paint protection film, the refractive index of the film is too different from that of the windshield. Because of this difference, putting the two together causes a distortion when looking through the glass that would be unacceptable to the vehicle’s occupants.

Can I Have XPEL Film Installed In Germany?

Yes. We have installers available worldwide. Please visit our Installer Locator to find an installer near you.

Will TracWrap Stick To A Vinyl Wrapped Car?

Yes, TracWrap can be applied to vinyl.

How Much Does Paint Protection Film Cost?

Because the product is installed by independent installers, cost varies greatly based on location, labor rates, and installer experience. To get an estimate from a local installer nearest you, please visit: XPEL Installer Locator

What If My Installation Was Done Incorrectly?

It is always best to contact your XPEL installer first and explain your concerns. We do our best to maintain a network of installers that stand behind their work. If after doing so, your installer cannot or will not address your concerns to your satisfaction, please contact our customer service team for assistance. They will get you in touch with the XPEL Representative for your area who will work to find a solution to the issue.

Can I Cover My Whole Vehicle With XPEL Film?

Yes. Most smooth painted surface can be covered with paint protection film.

Can XPEL Be Installed On My Airplane Or Aircraft?

Paint protection film can be applied on any smooth painted surface. However, given the tight tolerances on weight, balance and other factors on some aircraft, it is highly recommended to consult with the manufacturer of the airplane for strict guidance.

How Can I Wax STEALTH Without It Looking Shiny?

If you want to protect your STEALTH paint protection film, we recommend using our XPEL Flawless Finish Paint Protection Film Sealant or XPEL Ceramic Boost. When applying the sealant, work in small areas thoroughly wiping away all excess before moving on to the next section. Test an inconspicuous spot for application technique as installation is difficult due to the satin finish.

Can I Run My Car Through An Automatic Car Wash?

Yes, but please wait at least 48 hours after installation to allow the film to dry completely.

What Happens If You Put Acry-Solvent On The Film?

Acry-solvent, or any other Xylene based solvent, will not harm the film unless left sitting saturated in it for an extended period. To use this type of solvent on the film (for removing stains, etc.) wet a microfiber towel with the product and wipe the film for one or two minutes. If the stain remains, allow the solvent to evaporate and then repeat the process.

Can XPEL Be Installed On Boats And Other Watercraft?

Yes, while XPEL can be installed on marine boats and watercraft, please review the warranty for applicable surfaces.

Can I Use A Pressure Washer, And How Soon After Install?

Yes, pressure washers can be used on XPEL paint protection films, provided the film has completely dried after installation (typically 48 hours) and provided the high-pressure water is not pointed directly at the edges of the film.

Can I Install XPEL ULTIMATE PLUS Paint Protection Film Myself?

Other than the simplest body panels, application of paint protection film is a process which requires a good deal of experience and training to obtain satisfactory results. The compound curves present on most surfaces require the film to be stretched and compressed in a very controlled way to ensure proper adhesion without distorting the adhesive. As such, it is highly recommended that the film is professionally installed.

If I Apply A Ceramic Coating To STEALTH, Will It Make It Shiny?

It depends on the coating. Some may deepen the finish while others may add unwanted gloss. We recommend testing the coating on a swatch of unused film or in an inconspicuous area before coating a protected panel. We recommend using XPEL FUSION PLUS Ceramic Coating, our ceramic coating was designed with paint and XPEL Paint protection film in mind.

Will Removing The Film Harm The Vehicles Paint, Once Removed?

It is highly unlikely for paint protection film to harm OEM paint. Paint systems used on modern assembly lines today produce a minimum bond strength of 16 MPa and maximum of 25 MPa between the panel and the paint depending on color, iridescence and the system used. Our film’s bond to the painted surface at normal state (immediately following installation) is .0753 MPa. Even after years of heat and sun, the bond between the film and the paint increases to only 0.17 MPa. What that means is in the absolute worst case scenario, the bond of factory paint to the panel is over 94 times stronger than the bond of our film to the paint. In the best case, the paint is 332 times stronger.

That being said, it is still recommended to have a professional remove the film in accordance with our published guidelines.

Can I Have XPEL Installed Over My Vinyl Wrap Or Racing Stripes?

Yes. XPEL film can be applied over a vinyl wrap or graphics. However, if there are any hard edges that film must cross (as in the case of stripes), it could result in some air being trapped along that edge.

Can XPEL Be Installed On Your Vehicles Headlights And Fog Lights?

Yes, XPEL can be installed on your cars headlamps and fog lamps

How Do I Wash The Film, Can I Use A Quick Detailer Or Detail Spray?

We recommend using the XPEL Rinse Free Car Wash, combined with the XPEL Detail Spray and Ceramic Boost for increased cleanliness and slickness

Can XPEL Be Applied Over A Vehicle That Has Had Paint Touch Ups?

Yes. Though you can install the film over any quality of touch-up, the best possible appearance will be obtained if the touched up area has been color-sanded smooth and buffed after the application of the paint.

Can XPEL Film Be Installed On The Glossy Interior Panels Of My Car?

Yes. XPEL ULTIMATE PLUS can be applied to any smooth surface, though care should be taken around any electronics and/or switches so that installation fluids aren’t allowed to get into sensitive areas.

Can XPEL Paint Protection Film Be Installed On A Brand New Vehicle?

Yes, most factory paint is fully cured before the car ever leaves the assembly line.

What Can I Use To Clean The Film With If The Film Cleaner Isn’t Working?

XPEL Film Cleaner is generally designed to remove dirt, grime and oils from paint protection film that lead to yellowing over time. To remove stains from other substances such as insects, bird droppings or other compounds, use acetone or lacquer thinner with a soft microfiber cloth.

If I Get A Partial Front End Wrap, Will The Edge Of The Film Be Noticeable?

While the edge of the film can be seen from certain angles, people generally do not notice it unless they are looking for it. However, if the car is dirty and dust and dirt can collect along the edge of the film, it will be more noticeable. Once the car is cleaned, it will be once again difficult to detect unless looking for it.

A Piece Of Road Debris Scratched The Film On My Car. Will This Self-Heal?

The self-healing clear coat of our ULTIMATE PLUS and STEALTH films is designed to repair itself from swirl marks and light scratches from car washes, etc. If a piece of debris has penetrated all the way through the clear coat on the film, it will not self-heal. The only way to fix this would be to have the piece of film replaced.

How Can I Remove The Excess Adhesive After I Removed The Film Myself?

If there is left over adhesive upon removal, you can use a general purpose adhesive remover, often found at your local auto parts or home improvement store.

Does The 10-Year Warranty On ULTIMATE PLUS Transfer To Another Owner If Car Is Sold?

The XPEL ULTIMATE PLUS Film Series warranty is transferable to another owner with proof of purchase.

Once The Film Has Been Removed From My Vehicle, Can I Re-Use It On Another Vehicle?

No, the film once applied and removed cannot be reused.

Can I Install XPEL Paint Protection Film On Aluminum Or Brushed Metal Accents On The Car?

Any of our paint protection films can be installed on aluminum or brushed metal, though they may change the appearance to some degree depending on the film you choose. We recommend having your installer apply a small swatch of the film to the surface in question to determine the appearance prior to full installation.

What Is The Best Polish To Put On Your Car After You Have Had It Wrapped With XPEL ULTIMATE PLUS?

We recommend using our XPEL Flawless Finish Paint Protection Film Sealant. This product has been specially formulated for use with polyurethane paint protection films to provide the maximum protection and gloss, while containing no ingredients that would cause discoloration over time. We also recommend XPEL Detail Spray and/or Ceramic Boost for added slickness and ease of cleaning.

My Car Dealer Applied A Paint Sealant To My Vehicle, Can I Have XPEL Installed Over This Protectant?

Waxes, sealants and protectants are typically designed to reduce the surface energy of the paint, making them easier to clean etc. A reduction in surface energy will reduce the film’s ability to adhere to the paint and could cause long term adhesion issues. Because of this, we generally recommend removing these types of products before installation. If these types of coatings are to be used, we recommend applying them AFTER installation of our paint protection film.

Can I Apply A Ceramic Coating On Top Of The Film And How Does It Affect The Self-Healing Feature Of XPEL?

Yes, Coatings can be applied to the films. Adding a coating does not stop the film from self-healing. Coatings can add a protective layer over the film, which depending on the coating can provide different properties (Please contact your installer or coating company for more information). That additional coating layer, depending on the coating applied, may or may not self-heal. Once the coating wears down and deteriorates, the self-healing qualities of XPEL ULTIMATE PLUS and STEALTH will remain. We recommend XPEL FUSION PLUS Ceramic Coating. Our ceramic was specifically formulated for your vehicles paint and XPEL Paint protection film.

Can I Have XPEL Paint Protection Film Installed On Top Of My Ceramic Coating?

We would not recommend this, as it may result in poor adhesion to the painted surfaces. Professional removal of the ceramic coating is recommended. You may install XPEL FUSION PLUS on top of your XPEL Paint Protection Film. Check with your local installer for more details.

How Do You Remove The Material And What Kind Of Residue Or Marks Does It Leave On Clear Coat Type Paint?

Please see the diagram on www.xpel.com/care and be sure to use a steamer or heat gun to soften and warm the adhesive. This will yield the best possible results and will leave little if any adhesive behind. Any traces of residue left behind can be removed with any commercially available adhesive remover that is safe for automotive paint.

What Would Be The Best Way To Protect The Rocker Panels On My Truck From Getting Damaged From Rocks And Road Debris?

We offer pre-cut rocker panel coverage for most trucks and SUVs that can be professionally installed by our independent dealer network. Visit our Installer Locator for an installer near you for a quote.

We also make a rocker panel DIY kit to help protect your rocker panels. This product is available in our XPEL ULTIMATE PLUS film or our XPEL ARMOR film. ULTIMATE PLUS is our clear self-healing paint protection film, while ARMOR is a rugged film that is black and has texture similar to a spray in bed liner.

Can You Wrap A Whole Car In The Same Way You Can Color Change A Vehicle (Dismantling First) From Bulk Pieces Of Paint Protection Film?

Yes, assuming you and the installer are both comfortable with the risk, there is nothing about the film that would prevent this from being done. We also have designs for most body panels on nearly every vehicle, which would allow installation without dismantling the vehicle.

Can I Install A Vinyl Stripe On Top Of XPEL Paint Protection Film And Will I Be Able To Remove The Stripe Without Damaging The Clear Protection?

Yes, you can install a vinyl on top of the film. We recommend waiting 48 hours after installation before doing so. You may also remove the stripe without damaging the film, if removed properly.

Do You Make A Clear Film That Could Be Used To Protect A Windshield Without Distorting One’s View, Or Breaking The Glass Due To Expansion/Contraction?

No. We do not currently offer a windshield protection film.

When I Wear Polarized Sunglasses, My Paint Protection Film Appears To Have Blemishes And Distortions, Why Is That?

This is a very common occurrence with Paint Protection Film of all brands. It has to do with the difference in refractive index between the layer of film and the paint on the car. It is most noticeable on compound-curved surfaces because the film must be stretched over these areas to allow it to be installed without wrinkles. When the film is stretched, it becomes slightly thinner in those areas which causes the phenomenon seen through polarized glasses.

It can also occur on flat surfaces when the installer needs to use a drying solution (as opposed to a slip solution) such as alcohol and water to get the needed bond to the paint. This is due to the difference in viscosity of the fluids and their effect on the adhesive’s properties.

Polarized glasses have this effect on several different multi-layer surfaces (not just paint protection film) made of glass or plastic.

Headlight Protection Film

Can XPEL Be Installed On Your Vehicles Headlights And Fog Lights?

Yes. XPEL can be installed on your cars headlamps and fog lamps

I Have Installed The Kit On My Headlights And They Looked Fine, But Now They Look Foggy. Did I Do Something Wrong?

When using the wet application technique, this is normal. The fog is the result of the alcohol/water solution evaporating from beneath the plastic. The water vapor that is produced results in a hazy appearance for several days. The haze will clear as the vapor dissipates.

Is It Best To Apply Your Light Protection Kit To The Lenses Wet Or Dry?

We have found that the wet installation yields the best-looking installation with the least amount of difficulty in most cases. On larger headlamp pieces, bubbles and improper alignment of the material are far less likely using the wet installation method. However, on smaller pieces, such as fog lamps, the dry installation method is sometimes easier. This is especially the case if the lamp is spherical in shape.

I Have The Headlamp Kit Almost Completely Applied Using The Wet Application Method, But I Can’t Seem To Get The Edges To Completely Stick Down. What Am I Doing Wrong?

It is imperative that a hairdryer or heat gun is used in this area to seal the edges. The heat serves two purposes. First, it helps evaporate the remaining alcohol/water solution from under the edges, and second it makes the plastic more pliable so that it can contour to the shape of the light. Be careful if you are using a heat gun to warm the plastic. It takes only a small amount of heat to apply the material. If you apply too much heat you can damage the surface of the plastic.

What If I Want To Remove The Headlamp Shields At A Later Date?

The removal process is just a matter of warming the plastic and peeling them off. They will require some muscle to get them off, but they normally peel off without any residue left on the lens. If any adhesive at all remains behind, it may be removed by simply rubbing it with your thumb. The adhesive will then ball up and roll off.

Automotive Window Film

What Is The Warranty Period For Your Window Films?

We offer a transferable lifetime warranty on the following lines of our window film (CS, HP, XR and XR PLUS). The warranty covers against cracking, peeling, bubbling, delamination, fading and color change for the life of the film. The warranty is transferable and will continue with the car even in the event the ownership change.

Do You Offer Residential/Commercial Window Films?

Yes, we introduced XPEL VISION in early 2019 and has been an industry leader since its launch. Visit VISION Architectural Film

When Removing The Film Does The Adhesive Stay On Glass Or On Film?

Our window film is designed to with a very strong adhesive for durability, upon removal of the window film the adhesive may not fully transfer to the film and will remain on the glass. Your installer will be able to remove this during the installation process.

Can XPEL Window Film Be Used On Plexiglass?

We do not recommend installing XPEL PRIME Series Window Film to Plexiglass or plastic windows.

What Are The Benefits Of Window Film?

The many benefits of window film include heat reduction, eye comfort, UV protection, aesthetics, and increased safety, privacy, and energy savings.

What Do The Different Shades Of Film Mean?

Film percentages stand for visual light transmission (VLT), or the amount of light that is allowed through the film. The lower the percentage, the darker the film. With modern advances in window film, you can have great heat rejection with lighter films, no need to have dark window tint to receive the heat rejection benefits.

I Just Had My Windows Tinted, Why Do They Look Hazy?

The moisture that remains between the film and the glass after installation can cause a hazy, streaky, blotchy appearance. It takes several days for the film to completely cure. The remaining moisture will evaporate through the film; depending on the type of film, this process may take a couple of days, or even a couple of months (depending on your climate). When the water evaporates completely, your windows should have excellent clarity.

Is The Tint Applied To The Outside Of The Window?

No. Window film is installed on the inside of the glass. This allows for maximum durability

What Should I Use To Clean My Windows After I Have Had Them Tinted?

After window film installation, wait a week before cleaning the inside of the window where the film was installed. After a week, use XPEL Anti-Static Window Film Cleaner with a soft microfiber cloth. Never scrape the film with any type of blade or clean your tinted windows with anything abrasive, as it will scratch the film.

Do I Need To Wait To Roll My Windows Down?

We recommend that you leave your vehicle windows rolled up for at least 24-36 hours after window film has been installed. This allows the film to cure and adhere to the glass before the window is moved.

Does Blocking UV Rays Help Prevent Fading And Deterioration

Yes. The same sun that brightens your car’s interior can be detrimental to fabrics, leather, dashboard, and other interior surfaces. Ultraviolet rays are the main cause of both fade and deterioration. XPEL window films can screen up to 99% of the damaging UV rays that can fade surfaces.

RX ™ Antimicrobial Film

How Does RX Work?

In the presence of moisture, the ANTIMICROBIAL SURFACE PROTECTION additive gradually releases zinc pyrithione, which can strongly bind to cellular enzymes of the microbe while inhibiting enzyme activity in cell walls, membranes, and nucleic acids. Microbes have a negative surface charge, so zinc pyrithione with a positive charge are drawn towards them, disturbing their electrical balance. This results in the bursting of the cell walls, destroying the microbe.

What Are The Recommended Cleaning Guidelines?

RX can safely be cleaned with a wide variety of manufacturers bleach based and non-bleach-based cleaners as well Quaternary Ammonium Germicidal Wipes, from PDI, Safe Tec, Steris, Jet, and others. i.e., alcohol wipes, bleach wipes, germicidal wipes. Avoid hydrogen peroxide.

Can We Use XPEL Installation Gel To Install RX?

Yes, we recommend using XPEL Installation Gel for the application of the RX.

How Do You Clean The Surface Before Installation?

Due to the various surfaces this can be applied to, we recommend the least aggressive cleaning method to ensure no damage to the surface.

What Is The Cure Time After Installation?

The time can vary depending on the surface that RX was applied to and climate conditions. For most surfaces, please allow 24-48 hours before heavy usage.

What Surfaces Can RX Be Adhered To?

We would recommend something with a smooth uniform surface, such as glass, display screen, painted surface, etc. RX10 is designed to be optimal on completely flat surfaces and increases impact protection. RX8 is designed to conform with curved geometries and has more flexibility than RX10.

Can RX Be Used Indoors And Outdoors?

Yes, RX can be used both indoors and outdoors if RX is installed correctly and on proper surfaces.

How Do You Remove RX After The Warranty Period Has Expired?

RX can be removed in similar fashion to our paint protection films, use caution with removal on different substrates. Simply pull the film towards yourself at a 45-degree angle from the surface. Full removal instructions available on www.xpel.com

After Installation, How Do I Prevent The Edges From Lifting On RX?

If installing on a non-electronic surface, you can use isopropyl alcohol to remove any excess installation fluid and to squeegee the edges, to ensure they are secure on the surface.

What Is The Best Equipment To Test And Monitor The Effectiveness And Level Of Cleanliness?

We recommend the Hygiena SystemSure Plus ATP Monitoring System, accompanied with Hygiena Ultra Snap Surface ATP Test Device Swabs. Both can be found online via Amazon and Hygiena.

What Is ATP?

ATP is short for adenosine triphosphate and it is an organic molecule that is used by living cells as their main source of energy. Animal, plant bacterial, yeast and mold cell products and break down ATP to drive several biological processes, and the main energy transfer molecule in the cell. The presence of ATP on a surface indicates that the surface has not been adequately cleaned and has the potential to harbor and support bacterial growth. The residue may also contain hazardous material including protentional allergens. Therefore, ATP is an ideal indicator of surface cleanliness.

Does XPEL Offer Any Testimonials And References We Can Source For Our Customers?

Yes, these are available on our website, www.xpel.com/RX

Is RX Available In Both Gloss And Matte?

Yes, we offer RX in both a gloss and matte finish as well as two different thickness variations. RX10 with an extra impact layer for flat surfaces and RX8 with flexibility and the ability to install on complex surfaces such as door handles and other surfaces.

Is RX Aviation Approved?

RX has not been FAA approved, we cannot endorse application on aviation equipment at this time.

What Markets Or Sectors Is RX Currently Available?

There are endless possibilities with RX Anti-Microbial Surface Protection Film to include, but not limited to: Hospitals, Urgent Care Facilities, Out-Patient Surgery Centers, Food Industry, Residential and Commercial, and more

What Is The RX Warranty For Residential And Commercial Application? What Does The RX Warranty Cover?

Full warranty details for RX can be found at www.xpel.com/warranty-information

How Do You Know If RX Is Working?

You can use the same test equipment mentioned above to test the ATP on the surface, Hygiena SystemSure Plus ATP Monitoring System, accompanied with Hygiena Ultra Snap Surface ATP Test Device Swabs.

How Long Does It Take Minor Surface Scratches To Heal?

Light surface scratches will self-heal when external heat is applied.

FUSION PLUS ™ Ceramic Coating

What Is In FUSION PLUS Ceramic Coating?

FUSION PLUS uses Silicon Dioxide technology. It is a complex chemical matrix that is unique to us. A combination of several technologies that cross-link very strongly to form a strong 9H coating.

What Are The Benefits Of A Ceramic Coating?

Ease of maintenance, hydrophobic properties, and self-cleaning properties.

How Long Will My FUSION PLUS Ceramic Coatings Last?

FUSION PLUS Ceramic Coating warranties are available at www.xpel.com/warranty-information.

Is FUSION PLUS PAINT & PPF Scratch Resistant?

Yes, FUSION PLUS PAINT & PPF is a 9H ceramic coating that is scratch resistant.

How Many Days Before You Can Wash The Car? After Having XPEL FUSION PLUS Ceramic Coatings Applied To My Vehicle?

Cure times vary depending on which coating you have had applied to your vehicle. Please check with your local dealer or on our technical data sheets available on our website.

Do You Offer A Marine Coating For FUSION PLUS?

Yes, XPEL FUSION PLUS MARINE is designed to help protection your watercrafts surface.

Do You Offer An Aircraft Coating For FUSION PLUS?

No, we currently do not offer an aircraft ceramic coating.

Does The Warranty Apply To A Loss Of Hydrophobicity?

Warranty terms vary depending on your applied coating, please visit www.xpel.com/warranty-information for full warranty details and coverages.

What Are The Scenarios To Choose XPEL PPF Vs XPEL FUSION PLUS Ceramic Coating?

The first thing to know is that the two products are not comparable and thus not a true comparison to one another. Paint protection film provides a urethane layer of protection against rock chips and scratches. Ceramic coatings, even when cured, are microns thick and not engineered to stop rock chips. That said, it is an excellent product for protection against environmental contaminates such as bird droppings, bug guts, and more. Not to mention that it makes cleaning off track rubber much easier. To further answer the question – ceramic coatings are for customers who want some basic protection along with increased shine, gloss, depth of color, and great hydrophobic and self-cleaning properties. PPF are for the customers who want actual protection against rock chips and scratches.

What Are The Scenarios One Would Choose Both XPEL PPF & Ceramic Coating?

This combo is extremely common. The car enthusiast is after that best-case scenario type of maintenance. Having PPF and ceramic coating will keep the vehicle protected from rock chips, road debris, and more while having all the benefits of a ceramic coated car. Those benefits being hydrophobic properties, self-cleaning, and an increased gloss and depth appearance.

How Does A Ceramic Coating Alter The Paint Surface?

The coating links with the painted surface creating a new functional layer. By creating an inseparable bond on a molecular level with the vehicles paintwork you get a coating that cannot be washed off like a wax or sealant.

Can You Use Any Car Wash Product On FUSION PLUS?

If your vehicle is protected with XPEL FUSION PLUS, it is highly recommended you use an approved car wash solution, such as XPEL Rinse Free Car Wash, which is formulated to help encapsulate the dirt and help keep your surface protected and scratch free. XPEL Rinse Free Car Wash has been tested and works great with FUSION PLUS Ceramic Coating. Once you finish washing your vehicle, we recommend using XPEL Ceramic Boost spray, for an extra slick, hydrophobic surface. We also have XPEL Detail Spray for quick wipe downs in between washings.

Can You Apply FUSION PLUS PAINT & PPF On STEALTH? Will It Make It Glossy?

Yes, you can apply FUSION PLUS PAINT & PPF to the STEALTH film. It will not make the surface glossy; it will enhance the depth of the matte finish.

What Does 9H Mean?

9H hardness is a rating based on the Pencil Hardness Test, commonly used by manufacturers of clear and pigmented surface coatings. The Pencil Hardness test is used to determine the scratch resistance of a coating surface by using pencils to scratch the surface and rate the scratch resistance in relation to that pencils hardness and other materials of similar hardness.

What Surfaces Can I Have XPEL FUSION PLUS Installed On?

We offer a full line up of premium ceramic coatings. Visit www.xpel.com/fusion-plus for a full list of our ceramic offerings.

Are FUSION PLUS Coatings Self-Healing?

No, we do not offer a self-healing coating currently. We do have our paint protection films that feature self-healing features.

Does FUSION PLUS GLASS Prevent Stone Chips In The Glass?

FUSION PLUS GLASS is not a windshield protection film; it does not prevent stone chips. It helps make the glass surface more hydrophobic

How Can I Clean My FUSION PLUS GLASS Ceramic Coating?

We would recommend using XPEL Anti-Static Window Cleaner.

Does FUSION PLUS PLASTIC & TRIM Help Prevent Fading?

Yes, PLASTIC & TRIM helps prevent fading due to UV rays. It also enhances and rejuvenates the plastic and trim surface.

How Do I Clean My Plastic And Trim That Are Protected With FUSION PLUS PLASTIC & TRIM?

We would recommend using XPEL Rinse Free Car Wash

Can I Apply FUSION PLUS WHEEL & CALIPER To My Brake Calipers?

Yes, this product is designed for the high heat temperature for your vehicles wheel and caliper surfaces.

Will The XPEL FUSION PLUS UPHOLSTERY Discolor My Interior Surfaces?

No, factory interiors should not discolor, our product allows the material to breathe, retaining its natural feel and retaining its original look.

Does FUSION PLUS UPHOLSTERY Prevent Stains?

FUSION PLUS UPHOLSTERY helps prevent interior surfaces from stains and spills.

What Surfaces Can I Have XPEL FUSION PLUS UPHOLSTERY Applied To?

FUSION PLUS UPHOLSTERY can be applied to your automotive Fabric, Carpet, Leather and Vinyl. Do not use on Alcantara and Suede surfaces.

Will UPHOLSTERY Make My Upholstery Waterproof?

XPEL FUSION PLUS UPHOLSTERY helps protect your interior surfaces, (fabric, carpet, leather, and vinyl) from spills and stains. It is not a waterproofing coating.

Can UPHOLSTERY Be Used On Carpet?

Yes, UPHOLSTERY, can be used on carpets. All interior must be professionally cleaned before applying UPHOLSTERY. Avoid Alcantara and Suede surfaces.

Will The FUSION PLUS MARINE Prevent Gelcoat Fading?

FUSION PLUS MARINE will help prevent unsightly damage associated with UV Ray aging and fading colors.

Can It Be Used On Painted Aluminum Boats?

Yes, FUSION PLUS MARINE works on paint and gelcoat surfaces for the watercraft industry.

Can I Use FUSION PLUS MARINE On My Boat Trailer?

Yes, you can use FUSION PLUS MARINE on your boat trailer to help protect it when launching your watercraft.

VISION Window Film

How Long Does It Take For The VISION Films To Cure?

For the film to completely dry out, the weather conditions (cold vs. warm, non-sunny vs. sunny) will affect the total time. There may be small water beads and a slightly cloudy look till the film completely dries out. We advise to not clean the film for 30 days after installation to be safe.

How Does Window Film Improve Year-Round Comfort?

Window film creates a more comfortable environment through consistent climate control by eliminating “cold wall” and “hot wall” problems. Rooms stay more comfortable in the summer and winter, be reducing “hot spots”, no matter where the sun is shining.

Does Blocking UV Rays Help Prevent Fading And Deterioration?

Yes. The same sun that brightens a room’s interior can be detrimental to fabrics, furnishings, artwork, and rugs. Ultraviolet rays are the main cause of both fade and deterioration. Window films can screen out 99% of the damaging UV rays that can fade richly colored furniture, tapestries, and artwork. Heat and light also play a part in fading but using window film to block nearly 100% of UV rays will increase the life of your personal property for years.

What Should I Use To Clean My Windows After I Have Had Them Tinted?

After window film installation, wait until the film is cured before cleaning the inside of the window where the film was installed. After a week, use XPEL Anti-Static Window Film Cleaner with a soft microfiber cloth. Never scrape the film with any type of blade or clean your tinted windows with anything abrasive, as it will scratch the film.

What Do The Different Levels Of Film Mean?

Film percentages stand for visual light transmission (VLT), or the amount of light that is allowed through the film. The lower the percentage, the darker the film. With modern advances in window film, you can have great heat rejection with lighter films, no need to have dark window tint to receive the heat rejection benefits.

What Are The Benefits Of Window Film?

The many benefits of window film include IR heat reduction, eye comfort, UV protection, aesthetics, and increased safety, privacy, and energy savings.

When Removing The Film Does The Adhesive Stay On Glass Or On Film?

Our window film is designed to with a very strong adhesive for durability, upon removal of the window film the adhesive may not fully transfer to the film and will remain on the glass. Your installer will be able to remove this during the installation process.

Do You Offer A Film That Provides Nighttime Privacy?

We offer films that will give you daytime privacy, but current window film products do not offer nighttime privacy if the lights are on in your interior space. You do have the option to use a decorative window film, such as our white frost to achieve nighttime privacy, although you will not be able to see in or out during the day and night.

Do You Offer Security Film?

Yes, we do! Please check out the links in the header above for our VISION Security Line.

Can Security Film Be Installed In My Home And Office?

Yes, we offer security film for all applicable windows. Check with your local installer to see what available options there are for your home and/or office.

How Do I Clean My Security Film?

After window film installation, wait for the film to fully cure before cleaning the inside of the window where the film was installed. After a week, use XPEL Anti-Static Window Film Cleaner with a soft microfiber cloth. Never scrape the film with any type of blade or clean your windows with anything abrasive, as it can scratch the film.

What Is Anti-Graffiti Film?

Anti-graffiti film protects your glass from vandalism and etching. If your anti-graffiti film does get damaged, we can easily remove and replace with little to no damage to your glass. Replacing anti-graffiti film is a fraction of the cost to replace glass.

Do You Offer Anti-Graffiti Window Film?

Yes, we offer anti-graffiti window film for your home and or office.

Does The Anti-Graffiti Film Go On The Inside Or Outside Of My Window?

Yes, we offer anti-graffiti window film for your home and or office.

Is The Installation Process Of Architectural Window Film Messy?

No, if installed properly, your installation team will bring the necessary materials and tools to prevent mess in your space.

Can You See Through The Decorative White Frost?

No, the decorative film is opaque and does not offer visibility when looking through the film.

Can Your Decorative Film Be Installed In My Bathroom?

Yes, our decorative films can be installed in your bathroom. Our White Frost film is a popular window film for shower doors or windows for a custom look and privacy.

Do You Offer Decorative Window Film?

Yes, we offer decorative window film for your home and or office.

ULTIMATE PLUS ™ Paint Protection Film

To Keep Your Film Looking Great, Follow A Few Simple Guidelines:

  • Wait 48 hours after installation to wash your car.
  • Remove insect or other stains as soon as possible with XPEL Film Cleaner.
  • Stubborn stains can be removed with 99% isopropyl alcohol. Take care to keep these chemicals off the vehicle’s paint.
  • Seal with XPEL Flawless Finish Paint Protection Film Sealant at least once every 3 months to preserve high gloss. Installation instructions here: Sealant Instructions
  • Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.
  • Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.
  • Detailing Clay can be used to remove contaminants that are on the film.

STEALTH ™ Paint Protection Film

To Keep Your Film Looking Great, Follow A Few Simple Guidelines:

  • Wait 48 hours after installation to wash your car.
  • Remove insect or other stains as soon as possible with XPEL Film Cleaner.
  • Stubborn stains can be removed with 99% isopropyl alcohol or lacquer thinner. Take care to keep these chemicals off the vehicle’s paint.
  • You may use XPEL Flawless Finish Paint Protection Film Sealant to help preserve the finish, although beware if you do not apply in a uniform pattern, it can cause the film to look uneven. It is advised to be professionally applied. Installation instructions here: Sealant Instructions
  • Light scratches in the film will self-heal in 20-30 minutes at room temperature. In colder conditions, or to accelerate the process, pour warm water (120°F) over the affected area.
  • Avoid using a pressure washer or high-pressure water source near the edges of the film, it can cause the film to lift and/or become damaged.

PRIME ™ Automotive Window Film Care

Contrary to popular belief, LoreXPEL PRIME Automotive Window Films Were Designed To Keep Their Flawless Appearance And Clarity For Many Years. Follow These Tips To Properly Care For Your Windows And Keep Them Looking Their Best:m Ipsum is not simply random text. It has roots in a piece of classical

  • Keep in mind that your window tint may have a hazy appearance or moisture bubbles for up to ten days after installation. These conditions will disappear once the moisture used to apply your tint dries up completely.
  • Wait approximately 1-5 days after installation before rolling down or cleaning your windows based on the climate in which it was installed.
  • Use a microfiber towel slightly dampened with water to clean your windows. If necessary, mild, non-ammonia glass cleaners may also be used.
  • Avoid the use of abrasive materials such as scouring pads, to clean your tinted windows.

See our Automotive Window Film Frequently Asked Questions page for more info: Click here

Removing Paint Protection Film

Professional Removal Of The Film Is Recommended. However, When Professional Removal Is Not Possible, The Film May Be Removed As Follows:

  • Removal of paint protection film should be done with a steamer. It will keep the film pliable and wet so that it can be “stretched” off the vehicle.
  • Peel one corner of the film up with your fingernail.
  • Pull the film towards you at a shallow angle less than 45 degrees (see figure 8a). This angle is important to ensure sure that the adhesive comes off with the film rather than staying on the paint. The film should “stretch” off the car.
  • If any adhesive is left on the car, use a general adhesive remover to help loosen it.

See our Paint Protection Film Frequently Asked Questions page for more info: Click here

Removing Paint Protection Film

FUSION PLUS ™ Ceramic Coatings

Aftercare

Using XPEL aftercare products when detailing your various surfaces will significantly extend the life of FUSION PLUS. Our products have been designed to complement our coatings and will help keep your surface looking newer, longer.

Cleaning

  • For exterior cleaning, we recommend using XPEL Rinse Free Car Wash on a weekly basis, to avoid excessive contamination buildup. Avoid washing in direct sunlight to minimize streaking and water spotting.
  • Wash from the roof downwards, leaving the dirtiest sections last, avoiding possible cross-contamination. You can follow up with XPEL Detail Spray and XPEL Ceramic Boost for added gloss.
  • For interior cleaning, we recommend using XPEL Interior Cleaner (as needed) on your leather, plastics, and non-fabric surfaces. For fabric areas, we recommend vacuuming and using a clean, dry microfiber. We recommend testing in an inconspicuous area before applying XPEL Interior Cleaner – please read directions before applying.

Drying

  • Always dry the exterior surfaces completely using a clean, soft, lint free microfiber towel or air blower. Never allow water to evaporate on its own. Tap water can contain minerals which leave deposits on your coating, creating unwanted water spots.
  • For best results use XPEL Microfiber Towels, which have been designed to absorb water. Always avoid aggressive wiping.

Detailing

  • For exterior surfaces, follow washing and drying steps above. Follow up with XPEL Detail Spray for any left- over fingerprints or smudges on your paint protection film or surface. You can apply the XPEL Ceramic Boost (as needed) for added shine and slickness.
  • Avoid applying XPEL Detail Spray or XPEL Ceramic Boost in direct sunlight, to minimize streaking and water spotting.

Spot Removal Of Surface Contamination

  • Never use aggressive products to polish the coating or to removing surface contamination.
  • Visit your authorized XPEL FUSION PLUS installer for any questions you have on your coated surfaces.

Vehicle Inspection Schedule

To uphold the FUSION PLUS warranty, you must visit your FUSION PLUS certified installer (who applied your original coating), annually, during the duration of warranty. If you have had a change of address, please email warranty@xpel.com with any questions.

Warranty Coverage

XPEL FUSION PLUS is warrantied from date of original application (upon registration) and maintained in accordance with outlined warranty and conditions. For complete warranty information visit XPEL.COM/FUSION-PLUS

Paint Protection Film Warranties

ULTIMATE FUSION™ PPF

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the paint protection film may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or paint manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Use in non-automotive applications;
    • 12. Use of non-XPEL approved chemicals prior to, during or after installation on the Company’s Products. The Company’s approved chemical list is as follows: XPEL Ceramic Boost, XPEL Detail Spray, XPEL Iron Remover, XPEL Water Spot Remover, XPEL PPF Sealant, XPEL Rinse Free Car Wash, XPEL PPF Cleaner, XPEL FUSION PLUS Paint & PPF Ceramic Coating. If your chemical is not listed, it has not been recommended for use prior to, during or after installation on the Company’s Products.

      Limited Product Warranty

      ULTIMATE FUSION PPF

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of ten (10) years (the “Warranty Period”) from the date of initial installation, the Company will cover defects on ULTIMATE FUSION (the “Product(s)”) such as: yellowing, cracking, blistering, and delaminating. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      In addition to the terms above, the Company expressly warrants to the owner that, for a period of four (4) years (the “Warranty Period”) from the date of initial installation. The Company will cover additional defects on the ULTIMATE FUSION (the “Product(s)”) such as: oxidation, loss of gloss, UV damage, fading. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

      This Limited Warranty does not cover defects caused by:

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

    Annual Inspections

    Annual Inspections are applicable only to the additional defects applicable within the first four (4) years from the date of initial installation such as: oxidation, loss of gloss, UV damage, fading. The owner is required to have an annual inspection completed by an XPEL Certified Installer, within thirty (30) days before or after the yearly anniversary of the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the covered defects of the four (4) year limited warranty. Annual inspections are not required for the standard ten (10) year limited warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

ULTIMATE PLUS™ Series & STEALTH™ PPF

  • Limited Product Warranty

    ULTIMATE PLUS & STEALTH PPF

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of ten (10) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the ULTIMATE PLUS & STEALTH (the “Product(s)”) such as yellowing, cracking, blistering, and delaminating. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing the claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the paint protection film may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or paint manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Areas that have not been re-wrapped after a paint or body repair;
    • 12. Use in non-automotive applications.
    • 13. Use of non-XPEL approved chemicals prior to, during or after installation on the Company’s Products. The Company’s approved chemical list is as follows: XPEL Ceramic Boost, XPEL Detail Spray, XPEL Iron Remover, XPEL Water Spot Remover, XPEL PPF Sealant, XPEL Rinse Free Car Wash, XPEL PPF Cleaner, XPEL FUSION PLUS Paint & PPF Ceramic Coating. If your chemical is not listed, it has not been recommended for use prior to, during or after installation on the Company’s Products.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

ULTIMATE PLUS™ BLACK PPF

  • Limited Product Warranty

    ULTIMATE PLUS BLACK PPF

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of ten (10) years (the “Warranty Period”) from the date of initial installation, the Company will cover defects on ULTIMATE PLUS BLACK (the “Product(s)”) such as: cracking, blistering, delaminating and discoloration. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing the claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the paint protection film may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or paint manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Use in non-automotive applications;
    • 12. Use of non-XPEL approved chemicals prior to, during or after installation on the Company’s Products. The Company’s approved chemical list is as follows: XPEL Ceramic Boost, XPEL Detail Spray, XPEL Iron Remover, XPEL Water Spot Remover, XPEL PPF Sealant, XPEL Rinse Free Car Wash, XPEL PPF Cleaner, XPEL FUSION PLUS Paint & PPF Ceramic Coating. If your chemical is not listed, it has not been recommended for use prior to, during or after installation on the Company’s Products.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

LUX PLUS, LUX-M, ZEUS, MPD & ASP PPF

  • Limited Product Warranty

    LUX PLUS, LUX-M, ZEUS, MPD & ASP PPF

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of ten (10) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the LUX PLUS, LUX-M, ZEUS, MPD & ASP (the “Product(s)”) such as: yellowing, cracking, blistering and delaminating. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the paint protection film may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or glass manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Areas that have not been re-wrapped after a paint or body repair;
    • 12. Use in non-automotive applications.
    • 13. Use of non-XPEL approved chemicals prior to, during or after installation on the Company’s Products. The Company’s approved chemical list is as follows: XPEL Ceramic Boost, XPEL Detail Spray, XPEL Iron Remover, XPEL Water Spot Remover, XPEL PPF Sealant, XPEL Rinse Free Car Wash, XPEL PPF Cleaner, XPEL FUSION PLUS Paint & PPF Ceramic Coating. If your chemical is not listed, it has not been recommended for use prior to, during or after installation on the Company’s Products.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO

PROTEX PPF

  • Limited Product Warranty

    PROTEX PPF

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of ten (10) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the PROTEX PPF (the “Product(s)”) such as: cracking, blistering, and delaminating. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing the claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the paint protection film may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or glass manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Areas that have not been re-wrapped after a paint or body repair;
    • 12. Use in non-automotive applications.
    • 13. Use of non-XPEL approved chemicals prior to, during or after installation on the Company’s Products. The Company’s approved chemical list is as follows: XPEL Ceramic Boost, XPEL Detail Spray, XPEL Iron Remover, XPEL Water Spot Remover, XPEL PPF Sealant, XPEL Rinse Free Car Wash, XPEL PPF Cleaner, XPEL FUSION PLUS Paint & PPF Ceramic Coating. If your chemical is not listed, it has not been recommended for use prior to, during or after installation on the Company’s Products.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

XPEL ARMOR

  • Limited Product Warranty

    XPEL ARMOR

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, on vertical surfaces for a period of four (4) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the ARMOR (the “Product(s)”) such as: cracking, peeling, blistering, and delaminating. On non-vertical surfaces for a period of two (2) years (the “Warranty Period”) from the date of initial installation The Company will cover defects on the ARMOR (the “Product(s)”) such as: cracking, peeling, blistering, and delaminating. Surfaces are defined in this Limited Warranty below. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the ARMOR may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or paint manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Use in non-automotive applications.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

    Surface Definitions

    Vertical Exposure, the face of ARMOR is less than or equal to 10 degrees from vertical. Non-Vertical Exposure, the face of armor is greater than 10 degrees from vertical.

    ARMOR Vertical and Non-Vertical Exposure

     

Window Film Warranties

PRIME ™ Automotive Window Film

  • Limited Product Warranty

    PRIME ™ Automotive Window Film

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for the life of your vehicle (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the PRIME Automotive Window Film (the “Product(s)”) such as: discoloration, fading, bubbling, peeling, cracking, and delamination. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g., harsh cleansers and solvents), thermal abuse or shock (e.g., excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the tinted surface;
    • 6. Stains, and scratches;
    • 7. Damage to the tinted surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the tinted surface;
    • 9. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or glass manufacturer’ defects, which may be covered under manufactures protection plan;
    • 10. Use in non-automotive applications.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

VISION ™ Home & Office Window Film

WARRANTY INFORMATION

IMPORTANT: Read this entire Limited Warranty (not transferrable), before purchasing or installing XPEL® brand commercial and residential window films. By installing or using XPEL, Inc. (“XPEL”) VISION window films, you acknowledge that this Limited Warranty is part of the terms of sale.

WARRANTY COVERAGE

XPEL warrants professionally sold and installed XPEL® VISION brand commercial and residential window films (the “Products”) to be free from the following. Defects in materials and workmanship: peeling, bubbling, rippling, cracking, adhesive failure, delamination, and dementalization. XPEL does not warrant any conditions of, or damage to, the Products other than the conditions described in this Limited Warranty. Warranty time periods vary and are stated on the schedule on the back of this Limited Warranty. PLEASE NOTE IMPORTANT EXCLUSIONS AND PRE-APPROVAL REQUIREMENTS SPECIFIED ON THE REVERSE SIDE OF THIS DOCUMENT.

GLASS BREAKAGE WARRANTY

Except with respect to the exclusion provided below, this Limited Warranty on the Products covers glass breakage due to thermal stress. XPEL reserves the right to have a local representative of its choice inspect the affected window(s) before approving claims. Upon approval of a claim at XPEL’s sole discretion, XPEL will pay for glass unit replacement up to a maximum of $500 per window.

SEAL FAILURE ON DUAL-PANE UNITS

Except with respect to the exclusion provided below, this Limited Warranty extends to seal failure on dual pane units, if and only if the customer has and provides to XPEL a window manufacturer’s warranty against seal failure that is valid and not expired, at the time of claim. XPEL reserves the right to have a local representative of its choice inspect the affected window(s) before approving any claim. For approved claims, XPEL only warrants against seal failure for the remaining period of the window manufacturer’s warranty, or the time period noted on the reverse side, whichever is shorter. Upon approval of a claim at XPEL’s sole discretion, XPEL will pay for glass unit replacement up to a maximum of $500 per window.

EXCLUSIONS: XPEL’S OPTION TO REMOVE FILM

This Limited Warranty does not extend to damage caused by improper Product installation, improper Product application, improper Product care, cleaning or maintenance, abnormal conditions, abuse, misuse, normal wear and tear, accidents, intentional damage of any kind, improper or unauthorized repairs, or any other acts or defects not related solely to defects in materials or workmanship. Buildings with any prior history of seal failure or thermal glass breakage are not eligible for glass breakage or seal failure coverage. Further, in the event of multiple failures on one or more filmed windows, XPEL reserves the right to remove all XPEL window film and reimburse the customer only the amount of the original film installation.

GENERAL PROVISIONS

This Limited Warranty is offered only to the original purchaser at the time of Product installation. This Limited Warranty may not be transferred, sold or assigned. Rental units are considered commercial properties. This Limited Warranty terminates automatically upon any sale, conveyance or change in tenancy of any property. For valid warranty claims, XPEL will have an authorized XPEL installer of its choice remove and reapply the Product to areas determined by XPEL in its sole discretion to be covered by this Limited Warranty, and XPEL will cover parts and labor. The replacement of the defective film, including parts and labor, is the exclusive remedy for all Products covered under this Limited Warranty. Payment for labor charges covered by this Limited Warranty will be made directly to the authorized XPEL installer and will be calculated by using the coverage allowance published by XPEL.

WARRANTY DISCLAIMER

There are no warranties which extend beyond the description on the face hereof, nor are there warranties of fitness for a particular purpose or merchantability applicable to the products. This manufacturer’s warranty does not cover custom products, improper or poor installation of the products which include but is not limited to, squeegeeing, trimming and measuring. In no event shall the manufacturer be liable or responsible for any loss or damage including, without limitation, direct, indirect or consequential damages, except as expressly set forth herein. This limited warranty is made in lieu of all warranties, expressed or implied, and is void if the product has been subject to abuse, improper installation and/or care. This warranty gives you specific legal rights and you may also have other rights which vary by state or province.

WARRANTY DISCLAIMER; APPLICATION OF LAW

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF, NOR ARE THERE WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY APPLICABLE TO THE PRODUCTS. THIS LIMITED WARRANTY DOES NOT COVER CUSTOM PRODUCTS. THIS LIMITED WARRANTY ALSO DOES NOT COVER IMPROPER OR POOR INSTALLATION OF THE PRODUCTS, WHICH INCLUDES BUT IS NOT LIMITED TO SQUEEGEEING, TRIMMING AND MEASURING. TO THE FULLEST EXTENT PERMITTED BY LAW, THIS LIMITED WARRANTY DOES NOT EXTEND TO, AND IN NO EVENT SHALL XPEL OR ANY AUTHORIZED XPEL INSTALLER BE LIABLE FOR, ANY INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, CONSEQUENTIAL OR OTHER DAMAGE ARISING OUT OF THE INSTALLATION OR USE OF THE PRODUCT. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THE EXPRESSWARRANTIES AND REMEDIES DESCRIBED ABOVE ARE THE EXCLUSIVE WARRANTIES AND REMEDIES AVAILABLE AND ARE IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES, EXPRESS OR IMPLIED. XPEL HEREBY DISCLAIMS ALL OTHER EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO EVENT SHALL XPEL’S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT. THIS PROVISION SETS AN UPPER LIMIT TO THE AMOUNT OF DAMAGES, IF ANY, THAT THE OWNER OF THE PRODUCT MAY RECOVER FOR ANY AND ALL CLAIMS AND CAUSES OF ACTION. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION.

TO MAKE A WARRANTY CLAIM

This Limited Warranty is the Product owner’s sole and exclusive remedy. To file a warranty claim, you must first submit, within the Limited Warranty period, this warranty card and a copy of your original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect to the authorized XPEL installer who performed the installation of the Product, or in the event you are unable to contact the original authorized XPEL installer, to XPEL at the address below. All warranty claims must include the claimant’s name, phone number, address and the installation address (if different). All warranty claims must be approved by XPEL, and XPEL has the sole authority and discretion to determine the validity of all claims. XPEL reserves the right to deny claims that do not meet the criteria or are otherwise excluded as described above.

DISPUTE RESOLUTION

By installing or using the Product, you agree to use, and shall use, only the dispute resolution procedure provided herein to assert any and all claims, causes of action or demands arising from or related to the Product or this Limited Warranty. First, within the Limited Warranty period, you shall notify XPEL, in writing, of the specific act and/or omission that forms the basis of your claim related to the Product and/or your contention that XPEL has not performed its obligations under this Limited Warranty. XPEL shall have no less than thirty (30) days after receipt of your written notification to review your contention, during which time you are prohibited from taking any further legal action. You must use this procedure as a condition precedent to pursue any other legal action or remedy.

Second, if your claim or contention is not resolved within thirty (30) days after XPEL’s receipt of your written notification above, any and all claims, causes of action or demands arising from or related to the Product or this Limited Warranty will be subject to mandatory, good-faith mediation to take place in San Antonio, Texas, United States of America at a mutually agreeable time, or at such other location to which XPEL, in its sole discretion, agrees in writing. Such mediation must be held within sixty (60) days after the date that you notify XPEL, in writing, of the specific act and/or omission that forms the basis of your claim related to the Product and/or your contention that XPEL has not performed its obligations under this Limited Warranty. Your good faith participation in such mediation is a condition precedent to the initiation or filing of any arbitration or legal proceeding against XPEL. Third, if such mediation is unsuccessful, any and all claims, causes of action or demands arising from or related to the Product or this Limited Warranty will be subject to binding arbitration administered by JAMS. By installing or using the Product, you agree that the exclusive and mandatory venue and location for any arbitration arising from or related to the Product or this Limited Warranty shall be in San Antonio, Texas, United States of America, unless XPEL agrees in writing, at its sole discretion, to conduct such arbitration in another venue or location. You may file suit against XPEL in a court of competent jurisdiction only to enforce an award rendered, if any, in an arbitration conducted pursuant to this Limited Warranty. With the sole exception of your right to enforce an arbitration award as provided herein, by installing or using the Product, you agree to: (1) waive any and all right to assert or maintain litigation against XPEL in any court, tribunal or any foreign or international forum, and (2) waive any and all right to a trial by jury.

SPECIAL RESTRICTIONS ON GLASS BREAKAGE AND SEAL FAILURE WARRANTY

Many applications of XPEL films are automatically covered for glass breakage in accordance with the above schedule. However, certain darker films and certain types of glass do not qualify for coverage unless written approval has been obtained in advance of installation from XPEL. Certain film and glass combinations require preapproval, or are excluded. (See Film to Glass Chart for details)

NOTE: IF GLASS IS REPLACED BY THE CUSTOMER PRIOR TO MAKING A WARRANTY CLAIM FOR GLASS BREAKAGE OR SEAL FAILURE, THIS LIMITED WARRANTY IS VOIDED, UNLESS A DANGEROUS SITUATION EXISTS WHICH REQUIRES IMMEDIATE REPLACEMENT, IN WHICH CASE, THE CUSTOMER MUST TAKE A PHOTOGRAPH(S) THAT CLEARLY DEPICTS THE GLASS BREAKAGE OR SEAL FAILURE PRIOR TO REPLACING THE WINDOW. THE CUSTOMER MUST SUBMIT INFORMATION EVIDENCING THE DANGEROUS SITUATION AND THE REQUIRED PHOTOGRAPH(S) WITH ANY WARRANTY CLAIM.

SERIES FILM COMMERCIAL RESIDENTIAL GLASS BREAKAGE SEAL FAILURE**

VISION Warranty

Surface Protection Film Warranties

XPEL RX Anti-Microbial Surface Protection Film

  • Limited Product Warranty

    XPEL RX

    XPEL, Inc. (the “Company”) expressly warrants for personal or non-commercial use, for a period of five (5) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the RX Film (the “Product(s)”) such as: yellowing, cracking, and delaminating. For Commercial use, for a period of two (2) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the RX Film (the “Product(s)”) such as: yellowing, cracking, and delaminating. This Limited Warranty only applies to the Company’s Products which are installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the Product may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or paint manufacturer’ defects, which may be covered under manufactures protection plan; and

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

XPEL Headlight Protection Film

  • Limited Product Warranty

    XPEL Headlight Protection Film

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of seven (7) years (the “Warranty Period”) from the date of initial installation. The Company will cover defects on the Headlight Protection Film (the “Product(s)”) such as: yellowing, cracking, blistering, and delaminating. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and labor. The replacement of the defective film is the exclusive remedy for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below. You may also obtain this/these materials by contacting Company at +1-210-678-3700 or on the Company’s website at www.xpel.com.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the wrapped surface;
    • 6. Stains, and scratches;
    • 7. Damage to the wrapped surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the wrapped surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the headlight protection film may leave a stain, water spots are not covered;
    • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or paint manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Use in non-automotive applications.
    • 12. Use of non-XPEL approved chemicals prior to, during or after installation on the Company’s Products. The Company’s approved chemical list is as follows: XPEL Ceramic Boost, XPEL Detail Spray, XPEL Iron Remover, XPEL Water Spot Remover, XPEL PPF Sealant, XPEL Rinse Free Car Wash, XPEL PPF Cleaner, XPEL FUSION PLUS Paint & PPF Ceramic Coating. If your chemical is not listed, it has not been recommended for use prior to, during or after installation on the Company’s Products.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CANNOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

FUSION PLUS Ceramic Coating Warranties

FUSION PLUS ™ MARINE Ceramic Coating

    • Limited Product Warranty

      FUSION PLUS MARINE

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of three (3) years (the “Warranty Period”) from the date of initial installation. The Company will cover the recreational watercrafts factory paintwork on the FUSION PLUS MARINE (the “Product(s)”) against: environmental contaminants, loss of gloss, and UV damage. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $1000. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

      This Limited Warranty does not cover defects caused by:

       

      • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
      • 2. improper storage, installation, handling and/or use of the Product;
      • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
      • 4. unreasonable or unintended use of Product;
      • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to failing clear coat, swirl marks, scratches, scuffs, scrapes, chips to the watercraft surface;
      • 6. Minor conditions such as stains, and scratches;
      • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
      • 8. Swirl marks, scratches, scuffs, scrapes, chips to the watercraft surface;
      • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the watercraft surface and/or ceramic coating may leave a stain, water spots are not covered;
      • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or marine manufacturer’ defects, which may be covered under manufactures protection plan; and
      • 11. Areas that have not been re-coated after repair or replacement.
      • 12. Commercial and/or rear of fishing boats are not covered.
      • 13. Waterline and areas below the waterline are not covered.
      • 14. Walking areas and fish handling areas are not covered.
      • 15. Use in non-marine applications.

       

      Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

      THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

      Limitation Of Liability

      NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

      Annual Inspections

      Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection and single layer reapplication of coating. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS ™ PAINT & PPF Ceramic Coating

  • Limited Product Warranty

    FUSION PLUS PAINT & PPF

    XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of four (4) years (the “Warranty Period”) from the date of initial installation. The Company will cover the vehicles paint finish on the FUSION PLUS PAINT & PPF (the “Product(s)”) against: oxidation, loss of gloss, UV damage, color fading. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

    The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $1000. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

    You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing the claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

    This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

    Disclaimer Of Warranties

    The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

    This Limited Warranty does not cover defects caused by:

    • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
    • 2. improper storage, installation, handling and/or use of the Product;
    • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
    • 4. unreasonable or unintended use of Product;
    • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to scratches, scuffs, scrapes, chips to the painted surface;
    • 6. Minor conditions such as stains, and scratches;
    • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
    • 8. Scratches, scuffs, scrapes, chips to the painted surface;
    • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the paint and/or PPF may leave a stain, water spots are not covered;
    • 10. Damaged caused by collision, accidental damage, vandalism, fire, hail, flood, stones, collision, surface rust, rail dust, physical damage, paint overspray, or vehicle manufacturer’ defects, which may be covered under manufactures protection plan; and
    • 11. Areas that have not been re-coated after a paint or body repair;
    • 12. Use in non-automotive applications.

     

    Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

    THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

    Limitation Of Liability

    NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

    Annual Inspections

    Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS ™ WHEEL & CALIPER Ceramic Coating

    • Limited Product Warranty

      FUSION PLUS WHEEL & CALIPER

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of three (3) years (the “Warranty Period”) from the date of initial installation. The Company will cover the vehicles wheel and calipers on the FUSION PLUS WHEEL & CALIPER (the “Product(s)”) against: loss of gloss and environmental contaminant staining. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $500. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

      This Limited Warranty does not cover defects caused by:

      • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
      • 2. improper storage, installation, handling and/or use of the Product;
      • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
      • 4. unreasonable or unintended use of Product;
      • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to failing clear coat, swirl marks, scratches, scuffs, scrapes, chips to the wheel and caliper surface;
      • 6. Minor conditions such as stains, and scratches;
      • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
      • 8. Swirl marks, scratches, scuffs, scrapes, chips to the wheel and caliper surface;
      • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the wheel and/or caliper and/or ceramic coating may leave a stain, water spots are not covered.
      • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, stones, collision, surface rust, rail dust, physical damage, paint overspray, brake dust, or wheel and/or caliper manufacturer’ defects, which may be covered under manufactures protection plan; and
      • 11. Areas that have not been re-coated after a paint or body repair;
      • 12. Use in non-automotive applications.

       

      Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

      THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

      Limitation Of Liability

      NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

      Annual Inspections

      Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS ™ GLASS Coating

    • Limited Product Warranty

      FUSION PLUS WHEEL & CALIPER

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of three (3) years (the “Warranty Period”) from the date of initial installation. The Company will cover the vehicles wheel and calipers on the FUSION PLUS WHEEL & CALIPER (the “Product(s)”) against: loss of gloss and environmental contaminant staining. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $500. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

      This Limited Warranty does not cover defects caused by:

      • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
      • 2. improper storage, installation, handling and/or use of the Product;
      • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
      • 4. unreasonable or unintended use of Product;
      • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to failing clear coat, swirl marks, scratches, scuffs, scrapes, chips to the wheel and caliper surface;
      • 6. Minor conditions such as stains, and scratches;
      • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
      • 8. Swirl marks, scratches, scuffs, scrapes, chips to the wheel and caliper surface;
      • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the wheel and/or caliper and/or ceramic coating may leave a stain, water spots are not covered.
      • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, stones, collision, surface rust, rail dust, physical damage, paint overspray, brake dust, or wheel and/or caliper manufacturer’ defects, which may be covered under manufactures protection plan; and
      • 11. Areas that have not been re-coated after a paint or body repair;
      • 12. Use in non-automotive applications.

       

      Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

      THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

      Limitation Of Liability

      NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

      Annual Inspections

      Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS ™ PLASTIC & TRIM Ceramic Coating

    • Limited Product Warranty

      FUSION PLUS PLASTIC & TRIM

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of one (1) year (the “Warranty Period”) from the date of initial installation. The Company will cover the vehicles plastic and trim on the FUSION PLUS PLASTIC & TRIM (the “Product(s)”) against: environmental contaminant staining and fading. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $250. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below. You may also obtain this/these materials by contacting Company at +1-210-678-3700 or on the Company’s website at www.xpel.com/fusion-plus.

      This Limited Warranty does not cover defects caused by:

       

      • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
      • 2. improper storage, installation, handling and/or use of the Product;
      • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
      • 4. unreasonable or unintended use of Product;
      • 5. If the operator has deemed to have been negligent or failed to maintain the plastic trim in the correct manner;
      • 6. Minor conditions such as stains, and scratches;
      • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
      • 8. Scratches, scuffs, scrapes, chips to the surface;
      • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the plastics and/or trim or ceramic coating may leave a stain, water spots are not covered;
      • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or plastic and/or trim manufacturer’ defects, which may be covered under manufactures protection plan; and
      • 11. Areas that have not been re-coated after a paint or body repair;
      • 12. Use in non-automotive applications.

       

      Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

      THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

      Limitation Of Liability

      NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

      Annual Inspections

      Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS ™ UPHOLSTERY Ceramic Coating

    • Limited Product Warranty

      FUSION PLUS UPHOLSTERY

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of two (2) years (the “Warranty Period”) from the date of initial installation. The Company will cover the vehicles interior surfaces on the FUSION PLUS UPHOLSTERY (the “Product(s)”) such as: carpet, fabric, leather and/or vinyl against fading and non-removable staining. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $250. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

      This Limited Warranty does not cover defects caused by:

      • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
      • 2. improper storage, installation, handling and/or use of the Product;
      • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
      • 4. unreasonable or unintended use of Product;
      • 5. If the operator has deemed to have been negligent or failed to maintain the carpet, fabric, leather and/or vinyl in the correct manner;
      • 6. Minor conditions such as stains, and scratches;
      • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
      • 8. Damage to interior surfaces prior to application;
      • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the interior surface and/or ceramic coating may leave a stain, water spots are not covered;
      • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, physical damage, paint overspray, or carpet, fabric, leather and/or vinyl manufacturer’ defects, which may be covered under manufactures protection plan; and
      • 11. Alcantara and suede fabrics.
      • 12. Areas that have not been re-coated after a paint or body repair;
      • 13. Use in non-automotive applications.

       

      Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

      THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

      Limitation Of Liability

      NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

      Annual Inspections

      Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, interior detail, vacuum, and inspection. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

FUSION PLUS ™ MARINE Ceramic Coating

    • Limited Product Warranty

      FUSION PLUS MARINE

      XPEL, Inc. (the “Company”) expressly warrants to the owner that, for a period of three (3) years (the “Warranty Period”) from the date of initial installation. The Company will cover the recreational watercrafts factory paintwork on the FUSION PLUS MARINE (the “Product(s)”) against: environmental contaminants, loss of gloss, and UV damage. This Limited Warranty only applies to the Company’s Products which are professionally installed in the manner recommended by the Company.

      The Company will, at its option, remove or replace the Product without charge, or refund the cost of the Product, if the Product fails or does not perform as warranted solely due to a manufacturing defect within the Warranty Period, subject to the exclusions set forth in this Limited Warranty. If the Company elects to replace the Product, the Company will have an authorized installer of its choice remove and reapply the Product to areas determined by the Company in its sole discretion to be covered by this Limited Warranty. The Company will cover parts and the authorized installer will be responsible for providing installation labor. The refund of the cost of the Product or replacement of the defective coating are the exclusive remedies for all Products covered under this Limited Warranty. During the entire Warranty Period, the Company’s obligation as to repair or replacement shall further be limited to repair or replacement with the Products that are available at the time of the repair or replacement, shall be limited to the repair or replacement of only the specific Product that fails due to a manufacturing defect. The maximum replacement cost to be paid by the Company shall be the lesser of the cost of the coating application or $1000. Any repaired or replaced product shall also remain subject to the Warranty Period, and any repair or replacement shall not extend the original Warranty Period in any manner or start a new warranty period. These are the exclusive remedies for all Products covered under this Limited Warranty.

      You may obtain coverage under this Limited Warranty by providing Company with proof of warranty card, copy of original receipt for the Product identifying coverage areas, along with a detailed description of the purported defect. For service under this Limited Warranty, you must notify the authorized Company installer who performed the installation of the Product, in writing, providing claimant’s name, phone number, address, and the installation address (if different), a description of the product involved and the nature of the defect.

      This Limited Warranty is transferable only when the new owner submits to the Company proof of the original date of installation. Transfer of the Limited Warranty only entitles the new owner coverage for the remainder of the original Warranty Period.

      Disclaimer Of Warranties

      The Company’s Products must be stored, handled, installed, used, and maintained in accordance with instructions provided by the Company, and this Limited Warranty is conditioned upon compliance with all such instructions. Copies of the Company’s guides are available from the Company at the address listed below.

      This Limited Warranty does not cover defects caused by:

      • 1. non-compliance with the Company’s guide or instructions. Such failures include, but are not limited to, exposure to physical abuse, including, but not limited to chemical abuse (e.g. harsh cleansers and solvents), thermal abuse or shock (e.g. excessive heat or cold) or misuse;
      • 2. improper storage, installation, handling and/or use of the Product;
      • 3. damage not resulting from manufacturing defects that occur while the Product is in the customer’s possession;
      • 4. unreasonable or unintended use of Product;
      • 5. Products installed with known or visible manufacturing defects at the time of installation, including, but not limited to failing clear coat, swirl marks, scratches, scuffs, scrapes, chips to the watercraft surface;
      • 6. Minor conditions such as stains, and scratches;
      • 7. Damage to the coated surface due to improper wash techniques, automatic car washes or incorrect wash tools that may cause abrasion or by third parties not authorized by the Company;
      • 8. Swirl marks, scratches, scuffs, scrapes, chips to the watercraft surface;
      • 9. Water spots – water spots are caused by mineral deposits, which if left to dry on the watercraft surface and/or ceramic coating may leave a stain, water spots are not covered;
      • 10. Damage caused by collision, accidental damage, vandalism, fire, hail, flood, surface rust, rail dust, physical damage, paint overspray, or marine manufacturer’ defects, which may be covered under manufactures protection plan; and
      • 11. Areas that have not been re-coated after repair or replacement.
      • 12. Commercial and/or rear of fishing boats are not covered.
      • 13. Waterline and areas below the waterline are not covered.
      • 14. Walking areas and fish handling areas are not covered.
      • 15. Use in non-marine applications.

       

      Any information or suggestion by the Company with respect to the Products concerning applications, specifications or compliance with codes and standards is provided solely for your convenient reference and are made without any representation as to accuracy or suitability. You must verify and test the suitability of any information with respect to the Products for your specific application.

      THE WARRANTIES SET FORTH HEREIN ARE THE ONLY WARRANTIES MADE BY THE COMPANY IN CONNECTION WITH THESE PRODUCTS. THE COMPANY CAN NOT AND DOES NOT MAKE ANY IMPLIED OR EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, AND DISCLAIMS ALL OTHER WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. PRODUCTS SOLD BY COMPANY ARE SOLD ONLY TO THE SPECIFICATIONS SPECIFICALLY SET FORTH BY COMPANY IN WRITING. OTHER THAN THE LIMITED WARRANTY SET FORTH HEREIN, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED. THE COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY SHALL BE REPAIR OR REPLACEMENT OF NON-CONFORMING PRODUCTS, OR AT THE OPTION OF THE COMPANY, RETURN OF THE PRODUCT AND A REFUND OF THE PURCHASE PRICE. BUYER ASSUMES ALL RISK WHATSOEVER AS TO THE RESULT OF THE USE OF THE PRODUCTS PURCHASED, WHETHER USED SINGULARLY OR IN COMBINATION WITH ANY OTHER PRODUCTS OR SUBSTANCES.

      Limitation Of Liability

      NO CLAIM BY THE BUYER/OWNER OF ANY KIND, INCLUDING CLAIMS FOR INDEMNIFICATION, SHALL BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCTS IN RESPECT TO WHICH DAMAGES ARE CLAIMED. IN NO EVENT SHALL THE COMPANY BE LIABLE TO BUYER/OWNER IN TORT, CONTRACT OR OTHERWISE, FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, RELIANCE, STATUTORY, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, LOSS OF USE, LOSS OF TIME, LOSS OF REVENUES, INCONVENIENCE, LOSS BUSINESS OPPORTUNITIES, DAMAGE TO GOOD WILL OR REPUTATION, OR LOSS OF DATA, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR SUCH DAMAGES COULD HAVE BEEN REASONABLY FORESEEN, IN CONNECTION WITH, ARISING OUT OF, OR AS A RESULT OF, THE SALE, DELIVERY, SERVICING, USE OR LOSS OF USE OF THE PRODUCTS SOLD HEREUNDER, OR FOR ANY LIABILITY OF BUYER TO ANY THIRD PARTY WITH RESPECT THERETO.

      Annual Inspections

      Annual inspections must be carried out by an XPEL Certified Installer, within thirty (30) days before or after the installation date of the application or last service date. Failure to complete the inspection, within the required time will void the Limited Warranty. Any fees or charges by the XPEL Certified Installer will be charged to the owner to do the annual inspection including, but not limited to, exterior wash, decontamination, and inspection and single layer reapplication of coating. Please keep proof of all inspections, as they must be provided if you have a Limited Warranty related issue.

en_USEN
The message will be closed after 20 s
Ajax Loading